Berners designs

Many thanks for the team

$729 paid

31 custom designs

16 pre-qualified designers.

Learn more about Graphic Design Contest

Winning design #23 by Gigi Gavrila, Graphic Design for Berners designs Contest
Gold Medal

designed by Gigi Gavrila

Project description

Dear all,, I need a 2 designs for a small wooden burner for burning agarwood chips. It should be applicable(can be applied). I want an elegant shape and consists of two pieces: the bottom and the cover connected with hinge. The cover should have holes in a nice way so that the smoke goes out of it. Dimensions: The bottom diameter 7cm The height 14cm in all ( bottom and cover) Note: It's not necessary to have cylinder shape. You can create the shape depending on these dimensions.

Read full brief

Comments

  • I mean I hope to see more descriptive picture with sizes, Thanks
  • Thanks sir for this desgin plz I want a Measurement for inside this Berner , also design for inside I want to see inside this Berner the desh and the shape inside . Thanks again
  • Dear all I uploaded a figure for the design , but it's not good looking I need creative design and attractive . Thanks
  • I like your idea, unique. But I'm thinking of stability (flepping over / unbalancing) as safety factor. Making a narrow base with wide top will make it easy to fall I would like to see the same design with more safe use but keep the idea
  • Please comment #4 and tell about your wishes in advance. I can add handles for example.
    • Many thanks my dear , but I'm looking for best than this shape , I'm sorry to say that . Thanks

  • Hi sir Many thanks this is same the size I gave you ? Also make many hole in cover , and the place for coal make it bigger because the wedth for coal is 3 cm , make it 5.5 cm
  • hi ch. alalowwa i am in i will send to you design as well as possible soon i hope you will like my ideas thanks best regards babar786
    • Hi Many thanks my dear , I hope that I like your desgin .

  • Hello I Can not put no more drawing ... do not leave me this site, maybe with another Id...or e-mail?...
    • |--|

      GGDesign {*wrote*}:
      Hello I Can not put no more drawing ... do not leave me this site, maybe with another Id...or e-mail?...
      |--|Ok

  • Hi sir ,, The color in no.6 better than no.7 , and you can make please dark brown I want to see it plz . Thanks
  • Dear sir I want you to keep in mind that we use charcoal in the burner, and the heat of the charcoal reaches up to 10cm. So that, I would like you to make the cover long and includes holes for the heat and the smoke to go out. Also, the holder of the charcoal in the bottom part, should be made of ceramic or other material that does not transfer heat. Thanx
  • Dear all,, I add 100$ for my contest , maybe I will extended 1 weak more . Thanks
  • Hi CH, kindly check my entries #19 and #20. Hope to hear feedback from your end. thank you :)
  • Thank you for your nice idea of the design. Regarding the white part, I need the same opening on the other side so that the smoke goes out from both sides, also the base of it I need it more higher so that the heat of the charcoal will not effect the wood. Regarding the cover, I would like to see another design for it please.
    • Dear CH, Thank you for the feedback, I took your suggestions and i re designed the burner, the new version has ventilation from both sides as requested (inner body=ceramic, as well the outer wood), also the cover design is is changed and it swivel to open and close, and i tought about improving the heat issue even more so i designed the (metal part) that hold the charcoal to hang from the top and float, so the bottom is not touching anything, that will reduce the heat transfer even more. hope you like my second entry. thank you.

  • Hello CH, #21 Here is my first approach a modern sleek and functional design, it has outer shell of wood and inner one either ceramic or any other material that doesn't transfer heat, also the lid has hole ventilation as well as the front where the ceramic (inner shell) has an open in also the outer shell (wood) has ribs like to create opening also for design and looks. the charcoal goes in the burner (the spoon look like) that is portable can be removed from the whole berner. hope you like my entry.
  • Dear all ,, I'm extend the contest to get more designs . Thanks
  • Hello CH I just submitted two more designs one is based on the previous design with improvement and the other one is a different approach, #26 and #27 . Hope you like them. Thank you.
    • |--|

      CoolShady {*wrote*}:
      Hello CH I just submitted two more designs one is based on the previous design with improvement and the other one is a different approach, #26 and #27 . Hope you like them. Thank you.
      |--| Hi sir I will rate it soon

  • Hai CH, Please checkout #29. Tried out something different that would reduce production cost. Please rate. Thank you.