Ebay Listing Design

Great

md1

$499 paid

9 custom designs

5 pre-qualified designers.

Learn more about Website Design Contest

Winning design #9 by GoldenZ, Website Design for Ebay Listing Design Contest
Gold Medal

designed by GoldenZ

Project description

We require an eBay listing to be designed, this is promoting one product on the page, this design needs to heavily promote the product and make our product stand out as the best solution. Please find attached details of all that we require.

Read full brief

Comments

  • I'm In :) Preparing a concept while we speak. Regards, -Amr
  • Hello. I have a couple of questions regarding your contest. 1. Do you want a bright or dark design? 2. Do you want to use the old or new ebay logo? Thanks.
  • Dear CH, talking about keep the BMW website style, logo and colors, you should know is in Helvetica, so be sure to be allowed to use it.
  • Hello md1, I've made your revisions on entry #6 on real size, let me know if I've missed something, Hope you like the entry. Regards, -Amr
  • md1
    We love the design but would like just a few revisions to make it perfect: -The page seems quite narrow it needs to be sized for an eBay listing so max width around 1000pixels but close to that. -Where the telephone number and email address are at the top of the listing, it would be good to have a little icon of a telephone and a letter next to these like has been used in some of the other designs received. - The text in the Red box (the explanation of the problem) and the Green box (the explanation of the solution) need to stand out more, perhaps make a bit bigger. - The Red colour of the Red box (the explanation of the problem) is perhaps too vibrant, perhaps make this a lighter red so not so in your face. - Add a new first line in the Red box (the explanation of the problem) make this prominent with a bullet point and bigger text: “Swirl Flaps within your engine deteriorate over time and can end the life of your engine.” -Add a new first line in the Green box (the explanation of the problem) make this prominent with a bullet point and bigger text: “Install our Swirl Flap Blanks and rest in the knowledge that your engine is safe.” - The sections “Our product a perfect fit” and “complete kit”. Need to be more structured like other designs submitted, need to be within a box with title of the box. More professional looking. -“Our product a perfect fit!” This section should be in box with the box title being- “Our product a perfect fit!” The image of our swirl flap blank should be on the left with a square outline around it so it stands out from background, the text starting “precision machined..” should be on the right of the image. - “Complete kit” This section should be in box with box title being- “Complete kit”. The image of the complete kit (4X swirl flaps) should be bigger and span the box, the text underneath starting” you will receive..” should stand out more. - Put text “Full instructions included” in the green box below it remove text from that box. - Before table of models effected, add text- “Are you driving an affected vehicle?” Make this stand out with red background like other design submitted. - Bullet points starting with “Any questions..” Make more colourful like other designs small icons like other designs - Bottom of page about us info etc would be better in boxes with title like in other designs
    • |--|

      md1 {*wrote*}:
      We love the design but would like just a few revisions to make it perfect: -The page seems quite narrow it needs to be sized for an eBay listing so max width around 1000pixels but close to that. -Where the telephone number and email address are at the top of the listing, it would be good to have a little icon of a telephone and a letter next to these like has been used in some of the other designs received. - The text in the Red box (the explanation of the problem) and the Green box (the explanation of the solution) need to stand out more, perhaps make a bit bigger. - The Red colour of the Red box (the explanation of the problem) is perhaps too vibrant, perhaps make this a lighter red so not so in your face. - Add a new first line in the Red box (the explanation of the problem) make this prominent with a bullet point and bigger text: “Swirl Flaps within your engine deteriorate over time and can end the life of your engine.” -Add a new first line in the Green box (the explanation of the problem) make this prominent with a bullet point and bigger text: “Install our Swirl Flap Blanks and rest in the knowledge that your engine is safe.” - The sections “Our product a perfect fit” and “complete kit”. Need to be more structured like other designs submitted, need to be within a box with title of the box. More professional looking. -“Our product a perfect fit!” This section should be in box with the box title being- “Our product a perfect fit!” The image of our swirl flap blank should be on the left with a square outline around it so it stands out from background, the text starting “precision machined..” should be on the right of the image. - “Complete kit” This section should be in box with box title being- “Complete kit”. The image of the complete kit (4X swirl flaps) should be bigger and span the box, the text underneath starting” you will receive..” should stand out more. - Put text “Full instructions included” in the green box below it remove text from that box. - Before table of models effected, add text- “Are you driving an affected vehicle?” Make this stand out with red background like other design submitted. - Bullet points starting with “Any questions..” Make more colourful like other designs small icons like other designs - Bottom of page about us info etc would be better in boxes with title like in other designs
      |--| Hello Md1, Thanks for your feedback, I'm doing the revision while we speak, About the Narrow Looks, That's because I have decreased the resolution for a demo purpose, the actual design is more bigger and about 1000px so no worries about that. Thanks again, -Amr

    • md1

      Ok great, will look forward to seeing revisions.

  • md1
    a
  • Hello MD1, I've made your revision displaying on entry #9 :) Regards, -Amr
  • md1
    Hi, Sorry just a few last things: -The parcel picture next to the text “install our swirl flap blanks” Sorry could you make this a tick, a icon image in green, the same type of style as the ! icon in the problem section. -Could you move the two images of the product off of the border so they are displayed separately, there is an image here to show what I mean: http://174.120.242.250/~kieranm/moveboxes.jpg -I like the look of the about us etc at the end, could you just box these in like this: http://174.120.242.250/~kieranm/boxes.jpg - The Swirl flap solution logo at the bottom has been cut off it just says swirl flap, this needs to have the whole logo.
    • |--|

      md1 {*wrote*}:
      Hi, Sorry just a few last things: -The parcel picture next to the text “install our swirl flap blanks” Sorry could you make this a tick, a icon image in green, the same type of style as the ! icon in the problem section. -Could you move the two images of the product off of the border so they are displayed separately, there is an image here to show what I mean: http://174.120.242.250/~kieranm/moveboxes.jpg -I like the look of the about us etc at the end, could you just box these in like this: http://174.120.242.250/~kieranm/boxes.jpg - The Swirl flap solution logo at the bottom has been cut off it just says swirl flap, this needs to have the whole logo.
      |--| Hello MD1, I've made your revision displaying on entry #9 :) Regards, -Amr

  • I have made your revisions on entry #8 if you have any questions let me know. Regards, -Amr
  • md1
    The revisions look great thank you, just a few last things and we will be 100% happy with it: -Please remove text “the explanation of the problem” - Please remove text “the explanation of the solution” - The green icon next to “install our swirl flaps” doesn’t make much sense could you change this to a parcel or something like that. - The vector image (of the inside of the BMW engine) in the solution section isn’t correct it is a replication of the problems vector. -A couple of the sections need more structure, an image giving an idea of the structure can be found here: http://174.120.242.250/~kieranm/swirlex1.jpg - The bottom 3 sections postage, about us, our store, if each of these could be boxed in so as they are but with a box around each one that would be great.
    • |--|

      md1 {*wrote*}:
      The revisions look great thank you, just a few last things and we will be 100% happy with it: -Please remove text “the explanation of the problem” - Please remove text “the explanation of the solution” - The green icon next to “install our swirl flaps” doesn’t make much sense could you change this to a parcel or something like that. - The vector image (of the inside of the BMW engine) in the solution section isn’t correct it is a replication of the problems vector. -A couple of the sections need more structure, an image giving an idea of the structure can be found here: http://174.120.242.250/~kieranm/swirlex1.jpg - The bottom 3 sections postage, about us, our store, if each of these could be boxed in so as they are but with a box around each one that would be great.
      |--| Hello md1, I'm making the revision while we speak. I'll upload something very soon. Regards, -Amr

  • Dear CH, is possible to have a review of design #7 or do you have already choose one? Thanks
  • Hi CH, If there any chance to extend the contest? Thanks. Best Regards/WebStar